Free DFM review with every quote. Upload your drawing →
ISO 9001:2015 certifiedMolds & parts shipped to EU, USA & AsiaShenzhen factory since 2001
ISO 9001:2015certified factorySince 2001mold maker in ShenzhenEU & USAexport molds & parts

Insights · · updated

Do you build hot runner plastic molds?

When a hot runner pays for itself, and which systems we fit.

Do you build hot runner plastic molds?

Yes. We build hot runner molds with the major systems, including Mold-Masters, Husky, HASCO, DME, YUDO, INCOE and Synventive, and we fit the brand your standard specifies. The manifold and nozzles are selected for each tool, based on the resin, the part and the cavity layout.

What a hot runner does

In a cold runner mold, the channels that carry plastic to the cavities are molded with every shot and then removed as scrap or regrind. A hot runner keeps those channels molten inside a heated manifold, so only the part is ejected.

When a hot runner pays off

  • High volumes – no runner scrap on every shot, and shorter cycles because there is no thick runner to cool.
  • Multi-cavity molds – easier to balance filling across many cavities.
  • Large parts – filling long flow paths with less pressure, sometimes through several valve gates in sequence.
  • Cosmetic parts – small gate marks, or valve gates placed on hidden faces.
  • Expensive resins – less material wasted in runners.

When a cold runner is better

  • Low volumes, where the hot runner cost is not recovered.
  • Frequent colour changes, which are slower with a manifold.
  • Heat-sensitive materials that degrade if they sit in a heated manifold.
  • Very simple, small molds where cost matters most.

Open or valve gates?

Open gates are simpler and cheaper. Valve gates close mechanically, giving a cleaner gate mark and allowing sequential filling to move or remove weld lines on large parts.

Our hot runner projects

Examples include a single-cavity cabinet mold with a YUDO hot runner, medical cap molds with exchangeable inserts and high-volume molds for glass-filled PA66.

Questions about your own part?

Our engineers review drawings and reply in English.

Ask an engineer

Have a part that needs a mold?

Send a drawing and get engineering feedback with your quotation.

Get a QuoteCallEmail